Slide the power switch to the ON position to power on the camera
.
Before
switching on the camera
, a
im
the camera
at your t
arget
monitoring area
using the
laser pointer
.
After switching on the camera, the motion indication LED (red) will blink for
15
s
econds
before
the
autonomic captur
e of
photos or videos
. This 15 seconds allows time for
for closing and locking the bottom cover, fixing the camera on a tree and walk
ing
away.
In ON mode, it is
not
necessary to use the remote control. The camera will take
pictures or videos automatically according to the default settings or previous custom
settings. The camera has the sound recording function
. S
ound will be embedded
in the video clip while
recording
video.
2.4)
Enter TEST Mode
Slide the power switch to the TEST position
to
enter TEST mode. In this mode you
use the
camera to t
ake pictures or video clips like a
d
igital camera, or enter the Menu to set up
parameters by remote control.
2.5)
Enter OFF Mode
Slide the power switch to OFF position to power off the camera. Off mode allow user to insert
SD,
SIM Card, replace
b
atter
ies,
etc.
N
ote that even in the OFF mode, the camera still
consumes power at µA level. Therefore, remove the batter
ies
if the camera will
not be used for a long time
.
C
AUTION
: The
p
ower
s
witch can
not
s
lide
f
rom “OFF”
m
ode directly to “ON”
m
ode
,
or
f
rom “ON
”
m
ode to “TEST”
m
ode. Each time
you power on the camera
,
s
lide
the power switch
to “OFF”
m
ode, then to “Test”
m
ode
,
and
f
inally to “ON”
m
ode
.
