However, because each local
m
obile network operator has their own settings for their
MMS service, and those settings can change, you may need to acquire the settings
from your
m
obile network operator if the Auto-selected settings fail to work.
Click on
to choose the directory to save the settings, usually under the root
directory of the SD card (You need to insert the SD card in the SD card reader and plug it in your
computer.) Then, click on
. A file named
MMSSetup
will be created and saved
in the directory you just selected. If you selected a directory other than the SD card, you need to
move the file to the root directory of the SD card before inserting the SD card in the camera later
C
AUTION
:
Please do
n
o
t change the file name that
is
generated, otherwise
your camera will can
not
be setup
.
Click Exit to exit the MMS Setup interface. Re
mo
ve the SD card
from the PC
and insert it in the camera.
S
et the s
witch to the TEST position to enter the TEST mode. A message will
appear
on the display
indicating the MMS function has been successfully set up. Congratulations! You camera is
ready
to send pictures to your cell phone and/or email account every time it is triggered.
NOTES:
See
the following notes to
ens
ure the
MMS
is sending
picture
s correctly.
.
Ø
The camera is ON and functions
normally
. The SD card has enough space.
The
batteries
have enough p
ower capacity.
Ø
SIM card is installed. The MMS service is activated
.
(
S
ome MMS services need pre-paid
balance in the account.) The SIM card is not password-protected.
Ø
The signal
strength
is strong. The recipient phone number or email account is entered
correctly.
T
ake the receiving phone with you and do
a send-and-receive test on
site.
Ø
MMS parameters are set correctly.
Ø
The Timer function is OFF. If you have the Timer ON, make sure you are in the specified
time period when expecting incoming MMS pictures.
Ø
The camera is stationary while sending MMS pictures.
