9
P
ACK
L
ITE
TM
P
OWER
A
MPLIFIER
M
ODEL
A1
English
Deutsch
Français
Dansk
Español
Italiano
Svenska
Nederlands
4.
Using another ¼" TRS cable, connect the
THRU
connector
on the first A1 amplifier to the
INPUT
connector of the next
A1 amplifier.
5.
Connect a B1 bass module to the
OUTPUT
connector on
each A1 amplifier. If desired, connect a second B1 to the first
B1.
6.
Set power switch on both A1 amplifiers to ON (I).
Figure 5
Example of
using multiple
A1 amplifiers
B1 bass
modules
B1 bass
modules
First
A1
Next
A1
B1 bass
modules
PS1 power stand
CAUTION:
Be careful not to connect the A1 amplifier to a B1 bass
module that is already connected to the
Amp 3 OUT
connector of
a PS1 power stand or to another A1 amplifier.
Note:
Up to four (maximum) B1 bass modules can be
stacked in a column. Stacking may improve acoustic
output.
