P
ACK
L
ITE
TM
P
OWER
A
MPLIFIER
M
ODEL
A1
8
English
Deutsch
Français
Dansk
Español
Italiano
Svenska
Nederlands
Figure 4
Typical setup
B1 bass
modules
B1 bass
modules
PS1 power stand
Bass-Line
OUT
INPUT
OUTPUT
A1 amplifier
CAUTION:
Do not connect more than two B1 bass modules to an
A1 amplifier.
CAUTION:
Be careful not to connect the A1 amplifier to a B1 bass
module that is already connected to the
Amp 3 OUT
connector of
a PS1 power stand, or to another A1 amplifier.
Note:
Using the supplied
¼
"
TRS cable with your A1 amplifier is
recommended. Using balanced cabling prevents common
interconnect noise problems.
Note:
Up to four (maximum) B1 bass modules can be
stacked in a column. Stacking may improve acoustic output.
Using multiple A1 amplifiers together
To add more bass capability to your system, you can connect
multiple A1 amplifiers as shown in Figure 5 on page 9.
1.
Connect the AC power cord to an AC (mains) outlet.
2.
Make sure the Power switch is OFF.
3.
Using the supplied ¼" TRS cable, connect the
Bass-Line
OUT
connector on the PS1 power stand to the
INPUT
connector on the first A1 amplifier.
