REGULATORY AND LEGAL INFORMATION
5
|
E N G
Low-power Radio-frequency Devices Technical Regulations
Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency,
enhance transmitting power or alter original characteristic as well as performance to an approved low power
radio-frequency devices. The low power radio-frequency devices shall not influence aircraft security and interfere
legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said
legal communications means radio communications is operated in compliance with the Telecommunications
Management Act. The low power radio-frequency devices must be susceptible with the interference from legal
communications or ISM radio wave radiated devices.
Product Power State Table
The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC and
the Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020, is in
compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation
(EU) No. 801/2013.
Required Power State Information
Power Modes
Standby
Networked Standby
Power consumption in specified power mode, at 230V/50Hz input
Time after which equipment is automatically switched into mode
Power consumption in networked standby if all wired network
ports are connected and all wireless network ports are activated, at
230V/50Hz input
< 0.5 W
< 2.5 hours
N/A
all network types < 2.0 W
< 20 minutes
< 2.0 W
Wireless network port activation/deactivation procedures.
Deactivating all networks will enable standby mode.
Wi-Fi®
: Activate using the Bose Music app. Deactivate by
pressing and holding the Mute and
Bluetooth
buttons on
the remote simultaneously.
Bluetooth
®: Activate by pairing with a
Bluetooth
source
by pressing the
Bluetooth
button on the remote then
selecting the soundbar in your mobile device
Bluetooth
list
or by using the Bose Music app. Deactivate by clearing the
pairing list by pressing and holding the
Bluetooth
button
on the remote for 10 seconds.
Please dispose of used batteries properly, following local regulations
. Do not incinerate.
