BOSCHERT
82
Tel.: + 49 / 07621 / 95 93 0
Fax: + 49 / 07621 / 55 184
[email protected]
www.boschert.de
Mattenstrasse 1
79541 Lörrach-Hauingen
Version: 05 / 2011
Changes reserved
2 1
4 3
6
5
Hydraulic
8.2
Oil change
Planning maintenance work on the hydraulics
Determine the work to be done and provide the materials
to be used in time:
- Oil
- Filter
- Gaskets
- Sealing materials
- Empty container
- Aspiration pump
Ölwechsel Schnelle Hydraulik
With the speed hydraulics, oil change is done via the filter
plug (1), which is also required for exchanging the
backflow filter.
When changing the oil, the filter should generally be
replaced as well.
* Check the filter dirt display (2) while the aggregate is
running.
* Remove aspirated dirt particles from the cooler (blow
out cooler filter while the motor is off).
* Check the functioning of the thermostat on the cooler
(set thermostat (5) to minimum, blower must start when
the temperature has risen).
* Check the oil level displayed on the oil-level gauge
(3).
* For overall cleaning of the tank the discharge screw (4)
and the service cover (6) can be removed.
