en
operation
32
Requirement:
The laundry is pre-
pared.
→
1.
Open the door.
Make sure that the drum is empty.
2.
Place the laundry in the drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
13.6 Using the auxiliary deter-
gent dispenser compart-
ment
You can use the auxiliary dispenser
compartment in the detergent drawer
in order to better control the amount
of laundry detergent.
1.
Pull out the detergent drawer.
2.
Pour laundry detergent into the
auxiliary dispenser compartment.
Do not exceed the maximum mark
on the auxiliary compartment.
3.
Push in the detergent drawer.
13.7 Adding detergent and
care product
Note:
Observe the information about
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.8 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
If you start a programme with act-
ive oxygen, the drum lights up
after the programme starts and the
mist that is created can be seen.
a
After the programme has ended,
the display shows: End.
13.9 Adding laundry
Note:
If you a start a programme with
active oxygen, you cannot add any
laundry after the programme has
started.
1.
Press
.
The appliance pauses.
Note:
If appears, it is not pos-
sible to add laundry.
When goes out, it is possible to
add laundry.
2.
Open the appliance door.
3.
Add or remove laundry.
4.
Close the appliance door.
5.
Press
.
13.10 Cancelling the pro-
gramme
1.
Press
.
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
单漂洗
programme.
– If the water level is high, start
the
单脱水
programme or select
a suitable programme for drain-
ing.
→
3.
Содержание XQG100-WGC354B01W
Страница 55: ......