Installation and connection
en
37
5
Installation and
connection
Ins
tal
lat
ion
and
con
nec
ti
on
Standard accessories
Note:
Check the washer dryer for damage
sustained in transit. Do not switch on a
damaged washer dryer. If you have any
complaints, contact the dealer where
you purchased the appliance or our
customer service.
Note:
A hose clip Ø 24–40 mm (specialist
store) is also required for connection
to a siphon.
Connecting the water
~
Page 40
Useful tools:
■
Spirit level for alignment
~
Page 42
■
Size 13 socket wrench:
for loosening the transportation
protection devices
~
Page 39
and
size 17: for aligning the appliance
feet
~
Page 42
Installation
Note:
Humidity in the drum is caused by the
final inspection.
Secure installation
:
Warning
Risk of injury!
■
The washer dryer is heavy. Take
care when lifting it.
■
When lifting the washer dryer by its
projecting parts (e.g. washer dryer
door), the parts may break off and
cause injuries.
Do not lift the washer dryer by its
projecting parts.
■
If the hoses and power cables are
installed incorrectly, there is a risk of
stumbling and injury.
Lay hoses and cables in such a way
that there is no risk of stumbling.
Caution!
Damage to the appliance
■
Frozen hoses may tear or burst.
Do not install the washer dryer
outdoors and/or in an area where
there is a risk of frost.
■
When lifting the washer dryer by its
projecting parts (e.g. washer dryer
door), the parts may break off and
cause injuries.
Do not lift the washer dryer by its
projecting parts.
Depending on the model:
#
Aqua-Stop
@
Operating and
installation instructions
+
Aqua-Secure
H
Elbow for fixing the
water drainage hose
3
Standard
P
Covers
(
Water supply
0
Power cord
8
Water
drainage hose
+
#
3
