Display
en
21
--------
}
Remote Start
lights up:
Remote start function is activated.
£
Energy manager
Lit:
appliance is connected to the smart energy system
(Energy manager) (not available in every country)
ð
Empty the condensa-
tion container
■
Empty the condensation container and then rein-
sert it.
Then press
A
(Start/Pause).
■
Clean the filter in the condensation container.
■
If the optional drain hose* is installed, make sure
that the drain hose:
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
■
Run the intensive appliance care programme.
■
Check that no debris has found its way into the base
unit. Open the maintenance flap and remove any
debris.
õ
Base unit
ó
Automatic heat
exchanger rinse
The heat exchanger is being cleaned automatically. Do
not pull out the condensation container or cancel the
programme while this is displayed.
¤
Water reservoir
Fill the water reservoir with cold water for the crease
Press
A
(Start/Pause).
’§“
Basic appliance care
programme
Not a fault. After a certain period, the appliance will
automatically recommend that you run the basic appli-
ance care programme. Run the basic appliance care
•©£
CoolDown
The appliance can reach high temperatures when dry-
ing. The CoolDown process reduces the temperature to
prevent damage to the laundry when you:
■
Pause the programme
■
Cancel the programme
■
Switch off the appliance via the app
The CoolDown process does not start until 30 seconds
after pausing/cancelling the programme or switching
off the appliance via the app. You can continue to oper-
ate the appliance during the CoolDown process.
Notes
■
The drum continues to rotate during the CoolDown
process, even if you have paused the programme.
■
Do not change the programme during the
CoolDown process.
■
Temperature regulation can take up to 10 minutes.
Содержание WTX8HKP9SN
Страница 63: ...6 ...
