Bosch WTX8HKP9SN, Инструкция по установке и эксплуатации

Страница: 42 / 64

en
Draining the condensation water
42
Œ
Draining the
condensation water
Draining the condensation water
Condensation will form in the appliance
as it dries the laundry.
You must ensure that the drain hose is
connected when you operate the
appliance.
If there is no drain hose connected to
the appliance, the condensation water
from the appliance will run into the
condensation container. In this case,
you will need to empty the condensation
container each time the dryer finishes
drying the laundry, and also if it
becomes full before drying is complete.
Connect the drain hose as follows:
1.
Remove any accessories from the
drum.
2.
Remove all items from the bag.
3.
Detach the condensation hose from
the socket.
Note:
The appliance comes
delivered with the condensation
hose already fitted to the socket.
4.
Place the condensation hose in the
"parked" position.
5.
Take the drain hose from the
accessories and attach it to the free
socket, pushing it up to the stop.