Bosch WTW85490GB, Инструкция по установке и эксплуатации

Страница: 26 / 32

en
Installation and connection
26
Caution!
Risk of injury
■
Due to the heavy weight of the dryer,
you may injure yourself if you lift it.
Do not lift the dryer on your own.
■
You could cut your hands on the
sharp edges of the dryer. Do not
hold the dryer by the sharp edges.
■
Protruding parts on the dryer may
break off when it is lifted or pushed.
Do not move the dryer by holding
onto protruding parts.
Caution!
Risk of material damage to the dryer or
fabrics.
■
Check the dryer for damage caused
during transportation. Never operate
a dryer if it is damaged.
■
Any residual water in the dryer may
freeze and damage the dryer. Do not
install the dryer in rooms that are at
risk of frost.
During installation, ensure that:
■
The dryer is placed on a clean, level
and firm surface,
■
The mains plug can be accessed at
all times,
■
The air inlet on the dryer is kept clear
and there is sufficient ventilation,
■
The area around the dryer is kept
clean and
■
The dryer is levelled using the
threaded feet. Use a spirit level to do
this.
Changing the condensation
drain
Notes
■
The condensation from the dryer can
either be discharged into the
condensation container or drained
off via a connection to the waste-
water system. At the factory, the
condensation from the dryer is
discharged into the condensation
container.
■
If the condensation drain is installed,
residual water remains in the
condensation container because of
the dryer's self-cleaning function.
Change the condensation drain as
follows:
1.
Remove the accessory from the
dryer drum.
2.
Delivery status of the dryer. The hose
for discharging the condensation
into the condensation container is
secured to the connecting piece.
3.
Disconnect the hose from the
connecting piece and move it into
the "parked" position.