Bosch WTW85490GB, Инструкция по установке и эксплуатации

Страница: 20 / 32

en
Cleaning
20
Cleaning the moisture sensor
Note:
The dryer is equipped with a
stainless-steel moisture sensor. The
moisture sensor measures how damp
the laundry is.
After long periods of use, a fine layer of
limescale can form on the moisture
sensors. This must be removed
regularly.
Open the door and clean the moisture
sensor with a rough sponge.
Caution!
The moisture sensor may be damaged.
Do not clean the moisture sensor with
steel wool and abrasive materials.
Cleaning the filter in the
condensation container
Note:
The filter in the condensation
container cleans the condensation
water that is used during the dryer's
automatic cleaning cycle.
1.
Pull out the condensation container
horizontally.
2.
Pour out the condensation water.
3.
Remove the filter.
4.
Clean the filter under warm, running
water or in the dishwasher.
5.
Push in the filter until you feel it lock
into place.
Caution!
The dryer may be contaminated
with fluff and thus become
damaged.
Only operate the dryer with the filter
inserted.
6.
Push in the condensation container
until you feel it lock into place.