![background image](http://html.mh-extra.com/html/bosch/wqg233d1by/wqg233d1by_user-manual-and-installation-instructions_42294038.webp)
en
Troubleshooting
38
Fault
Cause and troubleshooting
The drying time is too
long.
The base unit's filter is soiled.
▶
"Cleaning the filter system on the base unit",
Fluff filter is soiled.
▶
"Cleaning the fluff filter", Page 28
The ambient temperature is greater than 30 °C.
▶
Ensure that the ambient temperature is lower than
30 °C.
The ambient temperature is lower than 15 °C.
▶
Ensure that the ambient temperature is above 15
°C.
Insufficient air circulation at the appliance's installation
location.
▶
Ventilate the appliance's installation location.
Appliance air inlet is blocked.
▶
Ensure that the air inlet on the appliance is kept
clear.
Heat exchanger is soiled.
1.
"Opening the base unit", Page 32
2.
Clean the heat exchanger.
→
"Cleaning the base unit", Page 33
3.
"Closing the base unit", Page 35
Water is leaking from
the appliance.
Appliance is not correctly aligned.
▶
Aligning the appliance
The seal for the heat exchanger cover is dirty.
▶
Clean the seal for the heat exchanger cover.
→
"Cleaning the filter system on the base unit",
The lever for the heat exchanger cover is not closed
correctly.
▶
Ensure that the lever for the heat exchanger cover
is closed correctly.
→
"Closing the base unit", Page 35
The laundry is too
damp.
Unsuitable programme for the type of fabric.
▶
Set a timed programme for the subsequent drying.
→
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
The load is too large.