Bosch WQG233D1BY, Руководство пользователя и инструкции по установке

Страница: 37 / 48

Troubleshooting
en
37
Fault Cause and troubleshooting
Creasing. The load is too large.
▶
Observe the maximum load capacity of the
→
"Programmes", Page 24 .
The laundry lies in the drum for too long after drying.
1.
Remove the laundry from the drum as soon as the
drying programme has finished.
2.
Spread the items of laundry for cooling.
Unsuitable programme for the type of fabric.
▶
Set the suitable programme for the type of fabric.
→
"Programmes", Page 24
Easy-Care fabrics are dried for too long.
▶
→ "Changing the dryness level", Page 23 .
▶
→ "Adjusting the dryness level", Page 23 .
Anti-Crease not activated.
▶
Activate the Anti-Crease function.
→
"Buttons", Page 21
and programme ter-
minated.
Condensation tank filled.
1.
→ "Emptying the condensation container", Page 31 .
2.
→ "Inserting the condensation container", Page 31 .
3.
→ "Starting the programme", Page 27 .
Foreign object is located in the base unit
1.
→ "Opening the base unit", Page 32 .
2.
Remove the foreign objects that are present.
3.
→ "Closing the base unit", Page 35 .
The programme does
not start. Childproof lock is activated.
▶
→ "Deactivating the childproof lock", Page 32
You have not pressed ⁠
Start/Reload
.
▶
Press ⁠
Start/Reload
.
No programme set.
1.
→ "Setting a programme", Page 27 .
2.
→ "Starting the programme", Page 27 .
The length of the pro-
gramme changes dur-
ing the drying cycle. The programme operation is optimised electronically.
This may change the programme duration.
▶
Not a fault – no action required.
Pumping noise. Condensation pump active.
▶
Not a fault – normal operating noise.
Buzzing noise. Compressor ventilation active.
▶
Not a fault – normal operating noise.