Operating the appliance
en
35
Ï
Extra Rinse
Settings that can be selected:
Additional rinse cycles for particularly
sensitive skin and/or for areas with very
soft water.
Longer programme duration, due to
additional rinse cycle.
The number of rinse cycles that the
programme actually runs depends on
the number that is set as a basic setting
for the programme.
2
Hygiene Care
An innovative function, pretreat dry
laundry by hot air (up to 65°C) for
additional hygienic demands, followed
by a low temperature washing cycle.
Achieves both hygiene effect and fabric
care. Suitable for most non-delicate
textiles.
Note:
During this process, the drum
light will illuminate for approx. 10
minutes.
G
SpeedPerfect
Washing in a shorter time while
achieving a washing result that is
consistent with the normal performance.
Touch
G
SpeedPerfect
to activate or
deactivate this additional programme
setting.
Note:
With the
G
SpeedPerfect
additional programme setting activated,
the maximum load of washing will be
reduced, and extra water will be needed
for the washing process.
1
Operating the
appliance
Operating the appliance
Preparing the appliance
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
¡
Drum Clean
programme.
"Before washing for the first time"
Notes
■
Never switch on a damaged
appliance!
■
Inform customer service!
1.
Insert mains plug.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
2.
Turn the water tap on.
3.
Open the appliance door.
+1
+ 1 rinse cycle
+2
+ 2 rinse cycles
+3
+ 3 rinse cycles