Malfunctions and remedial measures
de
advertisement
Cause / remedy
H: 95
alternating with
No water was detected during the drying phase. Poor drying result
possible.
Clogged water inlet filter "on page 46
“Ÿš
according to program
pass
H: 32
alternating with
The imbalance control system stopped spinning due to uneven
distribution of the laundry. Distribute small and large items of laundry
evenly in the drum.
“Ÿš
according to program
pass
More ads
Open the program selector
Off
set, wait five seconds and then
switch the device on again. If the display reappears, call customer
service.
Errors and measures to correct them.
Disruptions
Cause / remedy
Water is leaking out of
the device.
■
■
Fasten or replace the drain hose properly. Tighten the
screw connection on the inlet hose.
The washing machine door
cannot be opened.
■
~~~ (Rinse hold = no pumping at the end) is activated
(depending on the model). The program by selecting0 [
Spin / Drain
and pressingA.
Start / Reload (start / reload)
continue.
The temperature in the drum is too high to open the door.
The safety function is activated. Stop the program? The
water level in the drum is too high.
Can the door only be opened using the emergency release?
■
■
■
■
No water inlet.
■
■
■
Does the program not
start? Is the tap open?
Is the filter in the water inlet blocked?
Clogged water inlet filter "on page 46
No detergent is
washed in.
A notice:
If an additional water filter has been installed (depending on
the model), check it for contamination and clean it if necessary
~separate installation and cleaning instructions for the
water filter. Is the inlet hose kinked or pinched?
■
49
Содержание WNA13400EU
Страница 1: ...Washer dryer WNA13400EU deInstructions for use and installation ...
Страница 57: ...6th ...
Страница 58: ...6th ...
Страница 59: ...6th ...