Bosch WNA13400EU, Инструкция по использованию и установке

Страница: 41 / 60

Operate the device
de
Program termination
■
If the laundry is not done within 15
minutes of the
When the drying process is completed,
the anti-crease process starts to
prevent the laundry from creasing. The
process takes about 30 minutes. 0:00,
£ '˜, ̃ £ © and “Ÿš are displayed
alternately. In addition, the symbolV
displayed as a status symbol. This
process can be ended by touching any
key. The washing machine door is then
released and the laundry can be
removed.
For washing programs with a high
temperature:
1. The key A. Start / Reload (start /
reload) touch.
2. For cooling down the laundry Rinse
(Wash) à Select.
3. The key A. Start / Reload (start /
reload) touch.
For washing programs at a low
temperature:
1. The key A. Start / Reload (start /
reload) touch.
2. 0 [ Spin / Drain Select.
3. The key A. Start / Reload (start /
reload) touch.
W.
Remove ash / device
switch off
For programs in the drying process:
1. Turn the program selector to any other
program.
2. Wait a few minutes to let the laundry
cool down. The door will then be
unlocked.
1. Open the program selector Off
to adjust.
2. Open the washing machine door and
remove the laundry.
3. Turn off the tap.
A notice: This is not necessary with
AquaStop models.
End of program
Hints
■
Do not leave any items of laundry in
the drum. They may shrink the next
time they are washed or discolour
other items of laundry.
Remove foreign bodies from the drum
and the rubber sleeve due to the risk
of rust.
Wipe the rubber sleeve dry.
“Ÿš lights up in the display and the displays
~ and O are turned off.
If you select 2 only the water is pumped
out after the rinsing process, no spin cycle.
■
Hints
■
■
If in the display panel • © £ ( hot)
flashes before the drying program is
finished, the temperature in the drum
is high. The program for cooling down
the drum is carried out until the
temperature in the drum is reduced.
41