Bosch WNA13400EU, Инструкция по использованию и установке

Страница: 20 / 60

de
Positioning and connecting
■
Power cable change (if necessary) can only be
carried out by a qualified electrician.
Replacement power cable available from
customer service.
Multiple plugs / couplings and
extension cables are not used.
When using a residual current circuit
breaker, only one type with this
symbol is used: z.
Only this symbol guarantees
compliance with the current
regulations.
the power plug is accessible at all
times.
the power cord is not kinked,
squashed, modified, cut or come into
contact with heat sources.
A notice: To avoid foaming, only use
half the recommended amount of
detergent. Do not use wool or mild
detergents.
8th. Close the detergent drawer.
■
■
9. A. Start / Reload (start / reload)
to choose.
10. When the program has ended, open
the program selector Off
to adjust.
The device is now ready for use.
■
transport
■
z. B. when moving
Preparatory work:
1. Turn off the tap.
2. Reduce the water pressure in the inlet
hose. ~
Page 46
3. Pump off the remaining water. ~
Page 44
4th Disconnect the device from the mains.
5. Remove the hoses.
6th Empty the dosing container.
Before washing for the first time
The device was thoroughly tested before it
left the factory. In order to remove any test
water residues, the
program Cottons (cotton) i
Caution!
90 ° C without Do laundry.
Risk of damage to the appliance from
detergent or fabric softener leaking
from the dispenser
A notice:
■
The device must be properly
installed and connected.
Leaking detergent or fabric softener
can impair the function of the
appliance and
z. B. cause electronic damage. Empty
the dosing container before
transporting the device.
~ "
Positioning and connecting "on page
13
■
Damaged devices must not be put
into operation.
1.
2.
3.
Plug in the power plug. Open
the tap.
Close the washing machine door; do not put any
laundry into the machine.
4th
The program Cottons (cotton) i 90
° C to choose.
5.
6th
Open the detergent drawer. Pour
approx. 1 liter of water into
compartment II.
Pour all-purpose detergent into compartment II
for light soiling in accordance with the
manufacturer's instructions.
7th
20th