TroubleshootingNL
Malfunction
"E:36 / -10"
Cause and Troubleshooting
▶
When dosing manually, reduce the amount of
detergent for the next wash with an equal load.
Unauthorized extension mounted on the water drain
hose.
▶
Remove unauthorized extensions from the water
drain hose.
†Connecting the device", page 16
Pump cover is not fully screwed in.
▶
Make sure that the pump cover is screwed into the
device as far as it will go. The pump cover handle
must be vertical.
"E:38 / -25 / -26"
Drain pump is clogged.
▶
if the fault is displayed again,
▶
†Cleaning the drain pump", page 39
Inlet opening of the rubber sleeve is clogged.
▶
†Clean the inlet opening in the rubber sleeve",
"E:10 / -00 / -10 /
- 20"
Pump of the intelligent dosing system is blocked.
1.
Turn off the device.
2.
Clean the pump unit.
†Cleaning the detergent drawer", Page
3.
If the indication reappears, enable the service.
Remark:You can start the washing program if you
deactivate the intelligent dosing system and dose
manually.
"E:60 / -2B"
The unbalance detection system has interrupted the
spin cycle due to uneven distribution of the laundry.
▶
Redistribute the laundry in the drum.
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
43
Содержание WGG256A5NL
Страница 59: ......