en
Cleaning and maintenance
38
2.
To remove the insert: Push the insert
upwards from below with your finger.
3.
Clean the detergent dispenser tray
and insert with water and a brush,
and dry it. Clean the inside of the
housing as well.
4.
Fit the insert and lock it in place
(push the cylinder onto the guide
pin).
5.
Push in the detergent drawer.
Note:
Leave the detergent drawer open
so that any residual water can
evaporate.
Cleaning the measuring aid A
*
for liquid detergent
If it contains liquid detergent residue:
1.
Hold the measuring aid, pull the
cover upward and disconnect them.
2.
Clean the measuring aid and cover
with water and brush.
3.
Install the cover back to the
measuring aid. Pay attention to the
assemble mark, and press the cover
until click sounds.
* depending on the model
Содержание WGA254U0AU
Страница 51: ...6 ...
