en
Home Connect
40
3.
Pour liquid detergent and fabric
softener into the relevant dis-
pensers.
→
Do not exceed the marking for the
maximum fill level when filling.
4.
Close the dispenser cover.
Note:
To prevent the liquid deter-
gent or fabric softener from drying
out, close the dispenser cover im-
mediately after filling.
5.
If required, pour washing aid into
the compartment for manual dos-
ing.
→
6.
Push in the detergent drawer.
7.
15.3 Dispenser contents
Notes
¡
If you change the contents of the
dispenser, the basic dosage for
this dispenser is reset.
¡
If you use both dispensers for li-
quid detergent, you must select a
dispenser which is to be used dur-
ing washing.
You can change dispenser contents
in the basic settings.
→
"Changing the basic settings",
15.4 Basic dosage
The basic dosage depends on the
manufacturer's instructions for the de-
tergent, the water hardness and the
degree of soiling of the laundry.
Always set a basic dosage that cor-
responds to the dosage for a stand-
ard load of 4.5 kg.
You can change the basic dosage for
the dispenser in the basic settings.
→
"Changing the basic settings",
Home Connect
16 Home Connect
Home Connect
This appliance is network-capable.
Connecting your appliance to a mo-
bile device lets you control its func-
tions via the Home Connect app, ad-
just its basic settings and monitor its
operating status.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents sup-
plied by Home Connect.
¡
Please also follow the instructions
in the Home Connect app.
Notes
¡
Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→