Positioning and connecting
en
39
In addition
, a hose clamp (24 - 40 mm
diameter, available from specialist
dealers) is required to connect the
water drain hose to a siphon.
Useful tools
■
Spirit level for aligning
■
Spanner with:
– WAF13 for loosening the
transport braces, and
– WAF17 for aligning the appliance
feet
Safety instructions
:
Warning
Risk of injury!
■
The washing machine is very heavy.
Be careful when lifting/transporting
the washing machine.
■
When the washing machine is lifted
by its protruding parts (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
■
If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.
Caution!
Water damage
The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
leaks and water damage, you must
follow the instructions in this section.
Notes
■
In addition to the safety information
listed here, the local water and
electricity supplier may have special
requirements.
■
If in doubt, have the appliance
connected by a specialist.
(
Mains cable
0
Bag:
■
Installation and operating
instructions
■
Customer services location
directory*
■
Warranty*
■
Cover caps for openings after
the transport braces have
been removed
■
Adaptor with sealing washer
from 21 mm = ½" to
26.4 mm = ¾" *
8
Water supply hose on Aqua-Stop
models
@
Water drain hose
H
Elbow for securing the water
drain hose*
P
Water supply hose on standard/
Aqua-Secure models
*
depending on the model
3
+
#
