en
Basic operation
38
3.
Fold the measuring aid down and
click it into place.
4.
Push in the detergent drawer.
Adding detergent and care
product
Notes
¡
Please read the information in the
"Safety" →
sec-
tions to ensure that you use the
appliance safely.
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
Requirement:
Find out the optimum
dosage for "detergent and care
product." →
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
Start/Reload
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
If you start a programme with act-
ive oxygen, the drum lights up
after the programme starts and the
mist that is created can be seen.
a
After the programme has ended,
the display shows:
End
.
Soaking laundry
You can soak the laundry before
washing in the appliance by pausing
the programme.
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
Start/Re-
load
.
3.
To resume the programme, after
the desired soaking time, press
Start/Reload
.
Adding laundry
Notes
¡
Please read the information in the
"Safety" →
tions to ensure that you use the
appliance safely.
¡
If you a start a programme with
active oxygen, you cannot add any
laundry after the programme has
started.
1.
Press
Start/Reload
.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
Содержание WAV28L90BY
Страница 48: ...en Cleaning and servicing 48 3 Connect the water inlet hose and check for leaks ...
Страница 63: ......