Troubleshooting
en
51
Fault
Cause
troubleshooting
The appliance is not work-
ing.
There has been a power cut.
▶
Check whether the lighting in your
kitchen or other appliances are
working.
The programme does not
start.
You have not pressed
Start/
Reload
.
▶
Press
Start/Reload
.
Door is not closed.
1.
Close the door.
2.
Press
Start/Reload
to start the
programme.
Childproof lock is activated.
▶
- Finished in
+
is activ-
ated.
▶
Check whether
- Finished in
+
is activated.
Laundry is caught in the
door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press
Start/Reload
to start the
programme.
The door cannot be opened.
is activated.
▶
Continue the programme by select-
ing
Spin
or
Drain
and press-
ing
Start/Reload
.
the programme status is Rinse
Hold", Page 39
The temperature is too high.
▶
Wait until the temperature has
dropped.
▶
Water level is too high.
▶
Start the
Drain
programme.
Programme with active oxy-
gen has been stopped; the
active oxygen is removed.
▶
Wait until there is no active oxygen
in the drum.
Power failure.
▶
Open the door using the emergency
release.
The water is not draining.
Drain pipe or water outlet
hose is blocked.
▶
Clean the drain pipe and the water
outlet hose.
Drain pipe or water drain
hose is caught or jammed.
▶
Ensure that the drain pipe and wa-
ter drain hose are not kinked or
trapped.
Содержание WAV28L90BY
Страница 48: ...en Cleaning and servicing 48 3 Connect the water inlet hose and check for leaks ...
Страница 63: ......