Bosch WAU28RH7NL, Руководство пользователя и инструкции по установке

Страница: 50 / 60

NLTroubleshooting
Malfunction
Cause and Troubleshooting
Program centrifugal
run does not start.
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
▶
Start the programCentrifuge.
fizzing, hissing
loud.
Water is flushed into the detergent drawer under
pressure.
▶
No error - normal operating noise.
Loud noise during
spin.
The appliance is not leveled properly.
▶
→ †Adjusting the device", Page 16
Device feet are not fixed.
▶
Secure the device feet.
→ †Adjusting the device", Page 16
Transport protections have not been removed.
▶
→ †Remove transport locks", page 14†
Clapping, clattering
in the pump.
A foreign object has entered the pump.
▶
→
†Cleaning the drain pump", page 39
Slurping, rhythmic
suction sound.
Pump is active, the water is being pumped out.
▶
No error - normal operating noise.
wrinkling. Spin speed is too high.
▶
Set a lower spin speed for the next wash.
The load quantity is too high.
▶
Reduce the load during the next wash.
Unsuitable program set for the type of fabric.
▶
Select a suitable program for the type of fabric.
Detergent or detergent
softer drips from
the cuff and collects on
the door or in the cuff
fold.
Too much detergent/fabric softener in the detergent
drawer.
▶
When dosing the liquid detergent and fabric softener,
pay attention to the marking in the detergent drawer
and do not dose above that.
Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
Low spin speed is set.
▶
Set a higher spin speed for the next wash.
▶
Start the programCentrifuge.
is activated.
▶
Select a suitable program for the type of fabric.
Drain pipe or water drain hose is clogged.
50