Bosch WAU28RH7NL, Руководство пользователя и инструкции по установке

Страница: 48 / 60

NLTroubleshooting
Malfunction
Cause and Troubleshooting
▶ Clean the strainer in the water supply.
No water flows into
the device. The
detergent was not
washed in.
Water tap is closed.
▶
Open the water tap.
Water supply hose is kinked or pinched.
▶
Make sure that the water supply hose is not
kinked or pinched.
Start several times
with centrifugation.
The imbalance control system eliminates the
imbalance by distributing the laundry several times.
▶
No error - no action required.
Remark:When loading, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
The program duration
changes during the wash
cycle.
The program sequence is electronically optimized. This
may lead to changes in the program duration.
▶
No error - no action required.
The imbalance control system eliminates the
imbalance by distributing the laundry several times.
▶
No error - no action required.
Remark:When loading, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
The foam control system provides an extra rinse if the
foam is too high.
▶
No error - no action required.
The water is not
visible in the drum
bar.
Het water is onder het zichtbare bereik.
▶
No error - no action required.
▶ Do not fill the device with additional water during
operation.
Drum jerks after
program start.
The cause is an internal motor test.
▶
No error - no action required.
In the compartment
there is residual water.
Insert in compartment is hidden.
▶
→ †Cleaning the detergent drawer", Page
38
Vibration and movement
of the appliance
during the spin
run.
The appliance is not leveled properly.
▶
→ †Adjusting the device", Page 16
Device feet are not fixed.
48