Bosch WAT28799HK, Инструкция по эксплуатации и руководство по установке

Страница: 29 / 48

Additional programme settings
en
29
should be finished backwards, in
increments of 30 minutes and up to a
maximum of 24 h (h=hour).
After the programme starts,
the selected
time, e.g.
8.5 h
is displayed and counted
down until the washing programme starts.
The duration of the programme is then
displayed.
Note:
The programme duration is
automatically adjusted when the
programme is running. Changes to the
programme default settings or programme
settings, foam detection function,
unbalanced load detection, the load or
soiling may also change the programme
duration.
After the programme starts,
and while
the selected time is counting down, you
can change this as follows:
1.
Touch the control panel
A
.
2.
Touch
N
or
M
to change the time.
3.
And touch
A
again.
After starting the programme
, while the
programme is running, you can add or
remove laundry if necessary.
~
Page 33
Memory programme
â
You can save a selected programme
with your favourite settings here.
To store:
1.
Switch on the appliance.
2.
Select a programme.
3.
Change the settings and/or select
additional settings.
4.
Press and hold
â
on the control
panel for approx. three seconds.
The programme is saved if all of the
settings flash briefly.
To use the saved programme, touch
â
briefly after you switch on the appliance.
To change the saved programme, press
and hold
â
again for approx. three
seconds after selecting the new
settings.
\
Additional programme
settings
Additional programme settings
You can find an overview of all of the
additional settings that can be selected
depending on the programme on the
printed supplement to the installation
and operating instructions.
ActiveOxygen
Ø
The laundry is additionally treated with
active oxygen before the wash cycle
and before the final rinse cycle in order
to thoroughly remove germs and
bacteria.
SpeedPerfect
Speed
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more energy
than, the selected programme, without
the SpeedPerfect setting.
Note: Do not exceed the maximum
load.
EcoPerfect
Eco
Energy-optimised washing by reducing
the temperature while achieving a
washing result that is consistent with the
selected programme, without the
EcoPerfect setting.
Easy-Iron
Q
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.