Bosch WAT Series, Инструкция по эксплуатации и руководство по установке

Страница: 28 / 58

en
Programme default settings
28
i-DOS
i
for fabric softener
Adjustment values for dosage
quantities
Depending on what stage the
programme is in, you can change the
settings for automatic detergent
dosage. Touch the control panel i-
DOS
i
for this.
Memory programme
â
You can save a selected programme
with your favourite settings here.
To store:
1.
Switch on the appliance.
2.
Select a programme.
3.
Change the settings and/or select
additional settings.
4.
Press and hold
â
on the control
panel for approx. three seconds.
The programme is saved if all of the
settings flash briefly.
To use the saved programme, touch
â
briefly after you switch on the appliance.
To change the saved programme, press
and hold
â
again for approx. three
seconds after selecting the new
settings.
Remote start
}
Pressing
Remote start
}
allows you to
start the appliance remotely via the
Home Connect app or to call up the
Home Connect settings.
Enabling the appliance to be started
remotely via the Home Connect app:
Note:
Remote start can only be
activated if the appliance door and the
detergent drawer are closed and the
appliance is connected to your home
network.
■
Briefly press
Remote start
.
Note:
Remote start will be
deactivated for safety reasons in the
following circumstances:
When the door is opened,
When the detergent drawer is
opened,
In the event of a power failure,
When a programme has come to an
end,
When Start/Pause
‹
is pressed on
the appliance,
When
Remote start
is pressed
briefly again,
When
#
is pressed to switch off the
appliance.
Calling up Home Connect settings:
■
Press and hold
Remote start
for at
least 3 seconds.
L
Light:
For slightly soft laundry
K
Medium:
For laundry with a medium level of
softness
J
Heavy:
For particularly soft laundry
off Automatic dosing deselected