Bosch vivatmo pro Скачать руководство пользователя страница 30

Страница: 30 / 87

Instructions for use

Measure

English

Measuring

When you assist a person with the measurement, pay attention to the following steps:

10s

1. The patient should sit in a relaxed position, inhale deeply through the mouth

and lift the handheld to the mouth.

WARNING

The patient should avoid inhalation through the nose to

exclude influence of nasal NO-concentrations.

2. Exhalation should be performed through the disposable mouthpiece like

blowing into a recorder or cooling a hot drink. The breath control visualization

helps the patient to

stay within the dotted lines for the entire duration.

On the display, you see the remaining time to the end of the measurement.
Having performed the measurement the

Result

screen opens.

PPB

The measurement was successful.

Please remove the mouthpiece.

Inhalation through the disposable mouthpiece is without harm

but not recommended. When the regeneration is done, start

the measurement within 60 seconds.

Before the next FeNO determination, you must remove and

dispose the mouthpiece, see “8.2 Disposing the mouthpiece”.

3. Select the

to leave the

Result

screen. The

Patient File

screen opens.

Содержание vivatmo pro
























































































Результаты поиска

Содержание vivatmo pro

Отзывы:

Bosch vivatmo pro, Инструкция по эксплуатации, Страница: 30 / 87

Результаты поиска

Содержание vivatmo pro

Отзывы: