Disconnect battery pack
from tool or place the
switch in the locked or off position before
making any assembly, adjustments or
changing accessories.
Such preventive
safety measures reduce the risk of starting
the tool accidentally.
INSTALLING AND REMOVING
CREVICE NOzzLE
To install, firmly insert the crevice nozzle
completely into the intake port on the dust
chamber with the mark (shown in the
illustration) facing down. (Fig. 2).
To remove, simply pull out of dust canister.
INSERTING AND RELEASING
BATTERY PACK
Release battery pack from tool by pressing on
both sides of the battery release tabs and pull
downward (Fig. 3).
To insert battery, align battery and slide
battery pack into tool until it locks into position.
Do not force.
If battery release tabs are
cracked or otherwise
damaged, do not insert into tool.
Battery can
fall out during operation.
-8-
Assembly
!
WARNING
FIG. 2
CREVICE
NOzzLE
DUST
CANISTER
INTAKE
PORT
MARK
BATTERY
RELEASE
TABS
FIG. 3
!
WARNING
BM 2610035086 05-14_VAC120 5/14/14 8:50 AM Page 8
