English |
11
u
Do not use accessories which have not been specific-
ally designed and recommended for this power tool by
the manufacturer.
The mere fact that the accessory can
be attached to your power tool does not guarantee safe
operation.
u
The permitted speed of the application tool must be at
least equal to the maximum speed marked on the
power tool.
If accessories run faster than their rated
speed, they may break and fly off.
u
Always wait until the power tool has come to a com-
plete stop before placing it down.
Protect the power tool against heat, e.g.
against continuous intense sunlight, fire,
water, and moisture.
There is a risk of explo-
sion.
u
Do not use chemicals, undiluted acids, bleaches,
cleaning agents containing chlorine etc. when clean-
ing.
This could damage the surfaces being cleaned. First,
test for tolerance on an inconspicuous area.
u
Read all instructions on cleaning agents before using
them on hot surfaces.
Contact with hot surfaces can
cause cleaning agents to ignite or produce harmful va-
pours.
Product Description and
Specifications
Intended Use
The power tool is intended for the wet brushing of surfaces
in indoor and outdoor areas. It is particularly suited for
cleaning joints and tiles in the bathroom.
The power tool is intended only for household and domestic
use.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
On/off switch
(2)
Holder for cleaning pads
(3)
Brush
a)
(4)
Detailed brush
a)
(5)
Pad holder with climbing hook
a)
(6)
Blue microfibre non-scratch pad
a)
(7)
Green kitchen pad
a)
(8)
Brown, abrasive heavy-duty pad
a)
(9)
White eraser melamin pad
a)
(10)
Battery charge indicator
(11)
Micro USB port
(12)
Micro USB cable
(13)
Power supply
b)
(country-specific)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
b)
Commercially available (not included in the scope of deliv-
ery)
Technical Data
Cordless brush
UniversalBrush
Article number
3 603 CE0 0..
Rated voltage
V
3.6
No-load speed n
0
min
-1
215
Weight according to
EPTA-Procedure 01:2014
kg
0.33
Protection rating
IP X5
Protection against
water jets from all
directions
Recommended ambient tem-
perature during charging
°C
0 to +45
Permitted ambient temperat-
ure during operation
A)
and
during storage
°C
–5 to +50
Recommended power supply
2 609 120 7..
Rechargeable battery
Li-ion
Max. capacity
Ah
1.5
Energy
Wh
5.4
Number of battery cells
1
A) Limited performance at temperatures <0 °C
Additional technical data can be found at:
http://www.bosch-do-it.com/ecodesign
Noise/Vibration Information
Noise emission values determined according
to
EN 62841-2-4
.
Typically, the A-weighted sound pressure level of the power
tool is less than 70 dB(A). Uncertainty K = 3 dB. The noise
level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN 62841-2-4
:
a
h
<
2.5
m/s
2
, K =
1.5
m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
Bosch Power Tools
1 609 92A 6E5 | (30.11.2020)
