6 720 801 512 (2015/05)
Tronic 1000 T
Use | 77
5.2
Before switching on the appliance for use
▶ Verify that the electric current is not on.
▶ Ensure that the water connections are all correctly carried
out.
▶ Open the hot water tap and allow that the cold water
circulates around the interior of the appliance.
▶ Wait until water starts coming out of the hot water tap (sign
that the appliance is completely full).
▶ After having completed all the above mentioned steps and
procedures, turn on the electric current.
5.3
Temperature regulation
The temperature of the water outlet can be regulated, on the
temperature regulator selector:
•
up to 70 °C
Increasing the temperature
▶ Turn the temperature selector to the left.
Fig. 9
Increase the temperature
Decrease the temperature
▶ Turn the temperature selector to the right.
Fig. 10
Decrease the temperature
5.4
Emptying the appliance
▶ Turn off the appliance from the electric supply.
▶ Switch off the water cutting valve and open a hot water tap.
▶ Open the safety valve (Fig. 11).
CAUTION:
The first start-up of the appliance
must be carried out by an authorized
technician, which will provide the user with
all the necessary information to the best
working and handling of the device.
Once the water has reached the selected
temperature level, the appliance stops
heating up (the indicator switches off). When
the water temperature is below the desired
value, the appliance re-starts the heating
cycle (the indicator switches back on) until it
reaches the desired temperature selected.
6720643873-09.1V
+
DANGER:
Burn risk
Open a hot water tap to and verify the
temperature of the water in the appliance
before opening the safety valve.
▶ Wait until the water temperature
decreases in order to avoid burns or any
other damage.
6720643873-08.1V
-
