Bosch TES55236, Инструкция по эксплуатации

Страница: 36 / 52

32
Robert Bosch Hausgeräte GmbH
en
Preparing milk froth
¡
Risk of burns
The milk frother (6) gets very hot. Hold the
milk frother (6) by the plastic part only.
Tip:
You can foam the milk fi rst and then
dispense coffee, or foam the milk separately
and pour it onto the coffee.
The appliance must be ready for use with
the cleaned milk frother attached.
1. Press the
h
button (11).
The
h
button (11) fl ashes and the
appliance now heats up for approx.
20 seconds. The display then shows
Pull milk frother
.
2. Immerse the milk frother so that it
reaches the bottom of a cup or glass
that is one-third fi lled with milk.
3. Pull the milk frother (6) to open it.
¡
Risk of scalding
Splashes of milk can scald. Do not touch
the outlet (6a) or aim it at anyone.
4. Close milk frother (6) by pushing it in.
Tip:
For optimal milk froth quality, use cold
milk with a fat content of at least 1.5 % if
possible.
Important: Dried milk residue is diffi cult
to remove, so the milk frother (6) must be
cleaned with lukewarm water immediately
after use and rinse using the
Rinse milk
system
programme (see page 33).
Maintenance and
daily cleaning
¡
Risk of electric shock
Unplug the appliance before cleaning it.
Never immerse the appliance in water.
Do not use a steam cleaner.
● Wipe the outside of the appliance with a
soft, damp cloth.
● Do not use abrasive cloths or cleaning
agents.
● Always remove any limescale, coffee,
milk or descaling fl uid residue immedi-
ately. Such residue can cause corrosion.
New sponge cloths may contain salts.
Salts can cause rust fi lm on stainless
steel and must therefore be washed out
thoroughly before use.
● Pull the drip tray (8c) with the coffee
grounds container (8b) forward and out.
Remove the panel (8a) and the grate
(8d). Empty and clean the drip tray and
coffee grounds container.
● Remove drawer (4) and clean.
TES55236RU.indb 32 04.06.2013 14:35:45