Bosch TCE 4540, Оригинальное руководство пользователя

Страница: 8 / 24

1 695 105 790 2010-05-04
|
Robert Bosch GmbH
Initial commissioning | TCE 4540 | 31 en
4. Initial commissioning
4.1 Unpacking
1. Remove the tape and the fixing clamps from the
pallet and the packaging cardboard.
i
After unpacking check the integrity of TCE 4540 and
check that no components are visibly damaged. In
case of doubt do not proceed to start-up and con-
tact a qualified technician and/or your vendor.
2. Take out of the transport crate the standard accesso-
ries and the packaging materials.
i
Dispose correctly of packaging material, hand it over
to the designated collection points.
4.2 Installation
1. Loosen the four screws that fix TCE 4540 to the
pallet.
652061-02_Mi
Warning - damage risk!
The lifting belts can crush the flexible supply
pipes of the cylinder or damage the applied
parts of the TCE 4540
.
Insert the lifting belts carefully.
2. Insert the appropriate lifting belts (length belt 1: 1
mt, belt 2: 3 em, with sufficient capacity, as shown.
652061-03_Mi
1
2
Warning - tilting danger!
The barycentre of the TCE 4540 is not at its
centre.
It is essential to lift the machine slowly.