1 695 105 790
2010-05-04
|
Robert Bosch GmbH
Use | TCE 4540 | 37
en
Warning - damage risk!
During extraction with the hydraulic system
control unit the rim and the bead breaking
rollers can both be damaged.
The bead breaking rollers have to be pulled
out exactly in the same way that they have
been put inside the edge/in the shoulder
of the rim.
3.
With the hydraulic control unit central lever, move
the tightening flange in order to space the tire from
the bead breaking rollers (between 2 and 4 mm).
4.
Using the hydraulic control unit right and left levers
to bring both bead breaking rollers in the correspon-
dent starting positions.
!
Before positioning the mounting tool on the rim,
the tire pressure control sensor has to be brou-
ght to position 1 o'clock hour (consider that the
mounting tool is placed at 11 hour)!
5.
Using the joystick of the hydraulic control unit to lo-
wer the curved part of the tool and position it on the
tire shoulder, being careful not to touch the rim.
6.
Using the joystick of the hydraulic control unit, lower
the tool. Stepping on the tightening flange pedal,
rotate the tightening flange to grip the tyre bead and
use the lower roller to extract the bead completely.
652061-16_Mi
7.
Using the joystick of the hydraulic control unit lift the
tool in order to hoist the heel up to the upper edge
of the rim. Hoist the thrust block over the hump
using the lower roller to help extract the tyre, and
rotate the fastening flange by activating the pedal of
the same.
i
Only when you are sure that the mounting tool has
been positioned correctly and that the tire bead
comes out of the rim easily it is possible to activate
the fast rotation speed (by means of the tightening
flange pedal).
8.
Once the bead is extracted, using the joystick of the
hydraulic control unit, move the tool towards the
inside of the rim (in order to remove pressure on the
bead) and rotate the tightening flange stepping on
the tightening flange pedal.
652061-12_Mi
9.
Extract the tube (not necessary in case of tubeless
tires).
10.
Using the hydraulic control unit joystick to move
the tool in the lower part of the tire; use the central
button (AUTO) of the hydraulic control unit to place
it exactly on the edge of the rim.
652061-17_Mi
Содержание TCE 4540
Страница 2: ......