Bosch TCE 4540, Оригинальное руководство пользователя

Страница: 22 / 24

1 695 105 790 2010-05-04
|
Robert Bosch GmbH
Maintenance | TCE 4540 | 45 en
6. Maintenance
6.1 Suggested lubricants
Component Lubricant Standard
Gearbox ESSO Spartan EP460 ISO 460
DIN 51502-CLP
ISO 34-98-CC
Hydraulic pump ESSO NUTO H 46 ISO 46
DIN 51502-HLP
DIN 51524 PART.2-
HLP
ISO 67-43-HM
Pneumatic sys-
tem (conditio-
ning assembly) ESSO FEBIS K 32 ISO VG 32
Tab. 1: Lubricants table.
!
The manufacturer is not liable for any damage
caused by use of lubricants different from those
shown in the table.
6.2 Cleaning and servicing
Before any cleaning or maintenance interven-
tion use the main switch to disconnect the
TCE 4540 and take off the network plug.
To guarantee full efficiency of the TCE 4540 and to
ensure functioning without anomalies it is essential to
clean the machine regularly and carry out periodical
maintenance.
Maintenance has to be carried out by the operator
in accordance with the manufacturer's prescriptions
shown here below.
6.2.1 Service intervals
Maintenance
w
eekly
annual
Clean the mechanical moving parts, spray
them with nebulized oil or kerosene and lu-
be with motor oil or appropriate grease.
x
Remove condensate. x
Check oil level in the oil nebulizer. x
Check transmission belt tensio-
ning in order to avoid its sliding.
x
Check the oil level in the gearbox and keep it al-
ways between minimum and maximum level.
x
Change oil in the oil nebulizer. x
Change oil in the gearbox. x
6.2.2 Condensate removal
1. Turn left the red button placed in the lower part of
the water separator.
2. Remove the accumulated condense by pressing the
same button.
3. Turn back in previous position the red button placed
in the lower part of the water separator.
6.2.3 Nebulizer oil refill
1. Disconnect pneumatic connection.
2. Unscrew the tank cap on the oil nebulizer.
3. Top up oil (see lubricant table).
651003-12_Rf
6.2.4 Change oil in the oil nebulizer
1. Disconnect pneumatic connection.
2. Unscrew the tank cap on the oil nebulizer.
3. Discharge oil and dispose it (see chap. 7.3).
4. Top up with new oil (see lubricant table).
6.2.5 Gearbox oil change
1. Put a collecting tank underneath the gearbox.
2. Unscrew the oil discharge screw.
3.
Discharge oil in the gearbox and dispose it (see
chap. 7.3).
4. Screw the oil discharge screw.
5. Top up with new gearbox oil (see lubricant table).