16
| English
F 016 L81 153 | (1.7.14)
Bosch Power Tools
Troubleshooting
After-sales Service and Application
Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-garden.com
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of
products and accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
STOP
Problem
Possible Cause
Corrective Action
Motor refuses to start
Power turned off
Turn power on
Mains socket faulty
Use another socket
Extension cable damaged
Inspect cable, replace if damaged
Fuse faulty/blown
Replace fuse
Grass too long
Increase height of cut and tilt garden product to reduce starting
load
Motor protector has activated
Allow motor to cool and increase height of cut
Machine functions
intermittently
Extension cable damaged
Inspect cable, replace if damaged
Internal wiring of machine damaged Contact Service Agent
Motor protector has activated
Allow motor to cool and increase height of cut
Machine leaves ragged
finish
and/or
Motor labours
Height of cut too low
Increase height of cut
Cutting blade blunt
Replace the blade
Possible clogging
Check underneath the garden product and clear out as neces-
sary (always wear protective gloves)
Blade fitted upside down
Refit blade correctly
Blade not rotating while
garden product
switched on
Cutting blade obstructed
Switch off garden product
Clear obstruction (always wear protective gloves)
Blade nut/bolt loose
Tighten blade nut/bolt (17 Nm)
Excessive vibra-
tions/noise
Blade nut/bolt loose
Tighten blade nut/bolt (17 Nm)
Cutting blade damaged
Replace the blade
OBJ_BUCH-1919-004.book Page 16 Tuesday, July 1, 2014 9:57 AM