Bosch SOLUTION 6000 Скачать руководство пользователя страница 18

Страница: 18 / 48

Solution 6000

Bosch Security Systems 12/14 BLCC610U

User Guide

A1 Main Office

A2 Production

A3 Warehouse

Press



OK or MENU

2. Use the [



] and [



] keys to select the area that you

want to view the status information, then press

[OK] to select. Alternatively, you can enter the area

number, then press [OK].

The keypad will display

the area status information.

Main Office A1

Disarmed

Press OK or MENU

If the area is turned All On, the keypad will display

the following. Note in this example 1 zone has been

bypassed.

Main Office A1

Armed All On

1 Zones Bypassed

Press OK or MENU

If the area is turned Part On, the keypad will display:

Main Office A1

Armed Part On

Press OK or MENU

3. To exit, press [OK].

Areas > Commands >

Turn Area On/Off

MENU 2-0-1

This menu allows you to turn an area All On or off.
Enter programming mode (PIN + MENU) then,

1. Enter [MENU] + [2] + [0] + [1].

A list of different areas will display on the keypad.

A1 Reception Area

A2 Sales Dept



A3 Administration Dept

Press



OK or MENU

If an area has already been turned All On or Part On,

a ‘tick’ (



) will be displayed on the right side of the

name description (see A2 Sales Dept above).

2. Use the [



] and [



] keys to select the area that you

want to turn on or off, then press [OK] to select.

Alternatively, you can enter the area number you

want to turn on or off, then press [OK].

Areas > Commands >

Turn All Areas On

MENU 2-0-2

This menu allows you to turn on all areas that your PIN

has been assigned to at the same time All On. The keypad

display below shows the area icons 1 through to 8.
Enter programming mode (PIN + MENU) then,

1. Enter [MENU] + [2] + [0] + [2].

The keypad will display the exit time bar to prompt

you to exit all areas. You should leave all areas now.

Area 1 Name

EXIT NOW

When exit time has expired, the keypad will display

that all areas are turned All On (Armed).

Area 1 Name

ARMED

Fri,Aug,13 5:34 pm

Note

Area icons will only display if programmed to

do so by your security installer.

Areas > Commands >

Turn All Areas Off

MENU 2-0-3

This menu allows you to turn off all areas that your PIN has

been assigned to at the same time. However, this menu

requires at least one area that has a keypad assigned to it to

be disarmed before you can access this command.
Enter programming mode (PIN + MENU) then,

1. Enter [MENU] + [2] + [0] + [3].

Areas > Commands >

Move To Area

MENU 2-0-4

This menu allows you to operate multiple areas from the

same keypad when the system has been partitioned.

Before operating a different area, you will need to move

the keypad to the area that you want to operate.
Enter programming mode (PIN + MENU) then,

1. Enter [MENU] + [2] + [0] + [4].

A list of different areas will display on the keypad.

Содержание SOLUTION 6000

















































Результаты поиска

Содержание SOLUTION 6000

Отзывы:

Бренды по названию

Популярные бренды

Bosch SOLUTION 6000, Руководство пользователя

Результаты поиска

Содержание SOLUTION 6000

Отзывы:

Бренды по названию

Популярные бренды