manualshive.com logo in svg

Bosch Solution 2000, Руководство по установке

Bosch Solution 2000 - надежная система безопасности с быстрым руководством по эксплуатации для удобного использования. Скачайте бесплатное руководство по эксплуатации на manualshive.com и ознакомьтесь с основными функциями продукта. Легкая загрузка и доступ к полезной информации для вашего удобства.

Поделиться
Скачать
background image

1,9 Codepad Fire Alarm
This output operates when a user activates a Codepad Medical Alarm by pressing [4] and [6]
at the same time on the remote codepad. This output is reset when a valid User Code is
entered at the remote codepad.
1,10 Codepad Panic Alarm
This output operates when a user activates a Codepad Panic Alarm by pressing either [1] and
[3] or [STAY] and [AWAY] at the same time on the remote codepad , or when a keyfob Panic
Alarm is activated by pressing ARM button and DISARM button together on the learned keyfob.
This output is reset when a valid User Code is entered at the remote codepad, or ARM or
DISARM button on the keyfob is pressed to reset alarm.
1,11 Codepad Duress Alarm
This output operates when a user activates a Duress Alarm by adding a 9 to the end of the
User Code used to disarm the system. This output is reset the next time the system is armed.
1,12 Codepad PIN Error – Access Denied
This output operates when the wrong code is entered more times than allowed. The number
of incorrect attempts allowed is programmed in Location 424 or TEXT codepad option "Access
Retry" (Menu 2-3). This output is reset when a valid User Code is entered after the codepad is
unlocked.
1,14 Horn Speaker (Output 1 Only)
This output operates only on Output 1. Use this output for one or two 8 Ω horn speakers.
To enable monitoring of the horn speaker, select Option 2 in Location 492.
1,15 Sirens Running
This output operates for the duration of the Siren Run Time programmed in Location 479.
When the sirens are activated, this output is reset when the Siren Run Time expires. The relay
output (Output 4) is set by default for this operation.
2,0 Strobe Operating
This output operates when an alarm occurs and is reset when a valid User Code is entered.
The strobe output (Output 3) is set by default for strobe operation and is programmed to
reset automatically after 8 hours.
2,1 Silent Alarm
This output operates when any zone programmed to be silent activates. The output is reset
when the Siren Run Time expires, an audible alarm is activated, or a valid User Code is
entered.
2,2 Alarm When in STAY Mode
This output operates when an audible alarm zone is activated when the system is armed in
STAY Mode 1 or STAY Mode 2. The output is reset when the system is disarmed. Silent alarm
will not trigger this event.
2,3 Alarm When in AWAY Mode
This output operates when an audible zone alarm is activated when the system is armed in
AWAY Mode. The output is reset when the system is disarmed. Silent alarm will not trigger this
event.
2,4 Mimic System Fault
This output operates when any system fault occurs. The output is reset when all system faults
are restored.
2,5 Fire Alarm Resetting
This output operates when a 24-Hour Fire Zone or codepad fire alarm is activated. The output
is reset when a valid User Code is entered or when Siren Run Time expires.
2,6 Fire Alarm Latching

126 en | Programmable Outputs

Control Panel

2017.10 | 03 | F.01U.298.026

Installation Guide

Bosch Security Systems, Inc.

Содержание Solution 2000























































































































































Отзывы:

Нет отзывов

Похожие инструкции для Solution 2000

IBM 2702 Information Manual preview
2702
Бренд: IBM Страницы: 105
Waters 2690 Quick Start Manual preview
2690
Бренд: Waters Страницы: 55
Paradox IP150 Programming Manual preview
IP150
Бренд: Paradox Страницы: 2
dbx DriveRack PA User Manual preview
DriveRack PA
Бренд: dbx Страницы: 52
Hankscraft Runxin HS Series Service Manual preview
HS Series
Бренд: Hankscraft Runxin Страницы: 58
eclisse E-MOTION Installation, Operation And Maintenance Manual preview
E-MOTION
Бренд: eclisse Страницы: 40
Omegalink 553 Quick Start Operation Manual preview
553
Бренд: Omegalink Страницы: 2
NAPCO Gemini GEM-P9600 Installation Instructions Manual preview
Gemini GEM-P9600
Бренд: NAPCO Страницы: 6
NAPCO Gemini GEM-P816 Programming Instructions Manual preview
Gemini GEM-P816
Бренд: NAPCO Страницы: 56
Eaton EZD Series User Manual preview
EZD Series
Бренд: Eaton Страницы: 448
Eaton EC4E-221-6D4T1 Hardware And Engineering preview
EC4E-221-6D4T1
Бренд: Eaton Страницы: 57
Newport MM4005 User Manual preview
MM4005
Бренд: Newport Страницы: 417
M-system R3-PD16B Instruction Manual preview
R3-PD16B
Бренд: M-system Страницы: 10
Sartorius PR 5610 Installation Manual preview
PR 5610
Бренд: Sartorius Страницы: 165
Samson 3371 Series Mounting And Operating Instructions preview
3371 Series
Бренд: Samson Страницы: 70
Keysight Technologies 11713D Operating And Service Manual preview
11713D
Бренд: Keysight Technologies Страницы: 105
NDS SUNCONTROL2 User Manual preview
SUNCONTROL2
Бренд: NDS Страницы: 20
B&B Molders Nautilus P1 Installation Instructions & Owner'S Manual preview
Nautilus P1
Бренд: B&B Molders Страницы: 18

Бренды по названию

Популярные бренды

Загрузить еще бренды