Troubleshooting
aus
43
Fault
Cause and troubleshooting
Removable streaks
are present on
glasses, glassware
with a metallic appear-
ance and cutlery.
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
▶
Only remove large remnants of food and do not
prerinse tableware.
Irreversible clouding
of glassware.
Glasses are not dishwasher-proof, only suitable for
dishwashers.
▶
Use dishwasher-proof glasses.
Glasses are usually only suitable for use in a dish-
washer, i.e. long-term wear or long-term changes
must be expected.
▶
Avoid a lengthy steam phase (standing time after
wash cycle ends).
▶
Use a programme with a lower temperature.
▶
Use detergent with a glass protection component.
Rust spots on cutlery.
Cutlery is not sufficiently rust-resistant. Knife blades
are often more severely affected.
▶
Use rust-resistant tableware.
Cutlery may also rust if washed together with rusting
items.
▶
Do not wash rusting items.
Detergent residue is
present in the deter-
gent dispenser or the
tablet collecting tray.
Spray arms were blocked by tableware so detergent
was not rinsed out.
▶
Check that the spray arms are not blocked and can
rotate freely.
Detergent dispenser was damp when detergent was
added.
▶
Only add detergent to a detergent dispenser when
dry.
Excessive formation of
foam occurs.
Hand washing-up liquid is present in dispenser for
rinse aid.
▶
Immediately add rinse aid to the dispenser.
→
Rinse aid has been spilled.
▶
Remove the rinse aid with a cloth.
Detergent or appliance care product used causes ex-
cessive foaming.
▶
Change the brand of detergent.
