17
Child Lock (model dependent)
1
Start the desired cycle.
2 Hold down the button that says “Child Lock” underneath it for
approximately 4 seconds until the display reads
“CL”
.
3 The
“CL”
will be indicated now if any button is pressed and the pro-
gram will not be reset.
To deactivate the child lock:
1
Hold down the “Child Lock” button for approximately 4 seconds until
the display no longer reads
“CL”
.
Intensive Drying (model dependent)
The final rinse uses a higher temperature which improves the drying
results. The running time may increase slightly.
To turn intensive drying on:
1
Press the
[On/Off]
button.
2 Hold down the “
A
” button (see page 15) and press
[Start]
until the
display indicates “
d:00
”. Release both buttons.
3 Press the “
C
” button to turn intensive drying on or off. “
d:01
” = ON
and “
d:00
” = OFF
4 Press
[Start]
to save setting.
Auto Power Off (model dependent)
To save energy, the dishwasher is turned off 1 minute after the wash cycle
ends. Auto Power Off can be adjusted from P:00 to P:02.
To change the factory setting (P:01):
1
Press the
[On/Off]
button.
2 Hold down the
“A”
button and press
[Start]
until the display indi-
cates
“d:00”
. Release both buttons.
3 Press the
“A”
button until the display indicates
“P:01”
.
4 Press the
“C”
button until the display corresponds with your requirements.
P:00
= dishwasher does not turn off automatically
P:01 (default)
= dishwasher turns off automatically after 1 minute
P:02
= dishwasher turns off automatically after 120 minutes (2 hours)
5
Press
[Start]
to save the setting
.
