7
To Close:
•
Place finger as shown in
Figure 2
.
•
Slide door closed and press down firmly until it clicks.
To Open:
•
To open the cover, push the button as shown in
Figure 3
.
•
Cover will slide open.
Rinse Aid
To achieve proper drying, always use a liquid rinse aid, even if your detergent contains a rinse aid or
drying additive.
NOTE: The dishwasher indicates low rinse aid by turning on the “Refill Rinse Aid” LED in the display. If this light
is on, you need to refill the rinse aid dispenser by following the directions below.
Adding Rinse Aid
NOTICE
To avoid oversudsing or clogging, do not overfill the rinse aid dispenser. Wipe up any spills with a damp
cloth.
1
Add liquid rinse aid to the dispenser until it is full (see
Figure 4
). Do
not overfill.
2
Close the lid.
Lid must be fully closed until it clicks in order to seal.
3
Wipe up any excess rinse aid that may have puddled when the dis-
penser reservoir is full.
The indicator light will go out a few moments after the dishwasher door is shut.
See page 16 for instructions on how to adjust the amount of rinse aid dispensed.
Figure 4
Figure 2
Figure 3
