Bosch SGS 45N68, Руководство по эксплуатации

Страница: 16 / 28

en
16
* depending on model
Additional options can be set with the
buttons
H
.
Express Wash/ Speed Perfect (VarioSpeed)
Ÿ
Express Wash/ Speed Perfect/
(VarioSpeed) *
This function can reduce the running time
by approx. 20% to 50% depending on the
selected rinse programme. The change in
the running time is indicated on the digital
display
8
. To obtain optimum cleaning
results at a reduced running time, water
and energy consumption are increased.
Half load
§
Half load *
If you have only a few items to wash (e.g.
glasses, cups, plates), you can switch to
“half load”. This will save water, energy
and time. It is recommended to put a little
less detergent in the detergent dispenser
than for a full load.
Programme data
The programme data (consumption
values) can be found in the summary
of instructions. They refer to normal
conditions and the water hardness set
value
…
. Different influencing factors such
as water temperature or line pressure may
result in deviations.
Aqua sensor
Aqua sensor *
* depending on model
The Aqua sensor is an optical measuring
device (light barrier) which measures the
turbidity of the rinsing water.
The Aqua sensor is used according to the
programme. If the Aqua sensor is active,
“clean” rinsing water can be transferred to
the next rinse bath and water consumption
can be reduced by 2–4 litres. If the
turbidity is greater, the water is drained
and is replaced with fresh water. In the
automatic programmes the temperature
and running time can also be adjusted to
the degree of soiling.
Switching on the appliance
– Turn on the tap fully.
– Close the door.
– Switch on the main switch
(
.
Indicators light up according to the last
programme that was selected. This
programme runs if no other
programme button
h
is pressed.
The expected programme duration
is indicated on the numerical
display
8
.
– The programme starts running.
Note
- for environmentally friendly operation
of the dishwasher:
The Eco 50° programme is a particularly
environmentally friendly programme.
According to EU regulation 1016/2010 it
is the “Standard programme” which is
the most efficient standard cleaning
cycle for cleaning normally soiled
utensils in terms of the combined energy
and water consumption for cleaning
these types of utensils.
Additional options Basic functions