en-us
Troubleshooting
40
Error code
“
:
Ġ
is lit.
Drain pump blocked or cover on the
drain pump is not locked in position.
Clean pump and lock cover correctly.
Error code
“
:
ƒˆ
is lit.
Supply voltage too low.
Not a dishwasher fault, have the supply volt-
age and electrical installation checked.
A different
error code is
indicated on
the digital dis-
play.
(
“
:
‹‚
to
“
:
„‹
)
A technical fault has probably
occurred.
Switch off dishwasher with the On/Off
switch
(
. After a short time restart the
dishwasher.
If the problem recurs, turn off the tap and
pull out the power supply plug.
Call customer service and mention the error
code.
Refill indicator
light for salt
and/or
rinse-aid is lit.
No rinse aid.
Refill rinse aid.
No salt.
Refill with dishwasher softener salt.
Sensor does not detect salt tablets. Use different dishwasher softener salt.
Refill indicator
light for salt
and/or
rinse-aid is not
lit.
Refill indicator switched off.
Activation/deactivation
system / special salt" on page 13
There is still enough special
salt/rinse aid available.
Check refill indicator, levels.
Water is left in
the dishwasher
at the end of
the wash cycle.
Filter system or area under the fil-
ters
1b
is blocked.
Clean filters and area underneath.
Wash cycle has not ended yet.
Wait until wash cycle ends or reset.
Fault
Cause
Remedial action
* This is an optional feature which may or may not be included with your dishwasher.
Содержание SGE53X52UC
Страница 2: ...2 ...