en-us
Rinse Aid
16
Setting the amount of rinse
aid used
The amount of rinse aid dispensed
can be set from
§
:
‹‹
to
§
:
‹‡
. The
factory setting is
§
:
ܠ
.
You should only change the setting if
streaks remain on the dishes (lower
the amount), or if dishes are not
getting dry enough (increase the
amount).
1.
Press the
On/Off
button
(
.
2.
Hold down the function key
#
and press the
Start
button
P
until the display
8
indicates
•
:
‹
x or
š
:
‹
x (x can be any
number). Release both buttons.
3.
Press the function key
#
until
the display
8
shows
§
:
ܠ
.
4.
Press the function key
3
to
select the desired setting.
5.
Press the
Start
button
P
to
save the setting.
Turning off rinse aid
indicator
Proceed as described in the section
“Setting the amount of rinse aid
used” and set value to
§
:
‹‹
. The
rinse aid indicator is now turned off.
NOTICE
Using no rinse aid or setting the
dispenser to
§
:
‹‹
may result in
longer cycle times consuming more
energy and water. The higher
temperatures and longer cycle times
can damage fine china or glassware.
Setting
Amount
§
:
‹‹
dispenser is OFF
§
:
‹‚
lowest setting
§
:
‹ƒ
low setting
§
:
‹„
medium setting
§
:
‹…
medium/high setting
§
:
ܠ
high setting
§
:
‹‡
highest setting
Содержание SGE53X52UC
Страница 2: ...2 ...