Bosch Sensortec
"
|
Application Board 3.0 User Guide
5 | 22
Modifications reserved | Data subject to change without notice
Document number: BST-DHW-AN008-00
1
About this document
This document describes the operating procedures of the Application Board 3.0 and additional details about the board
itself.
To ensure that the Application Board 3.0 is working correctly, follow these instructions carefully before using it.
Definition of special notices
Warning
: Indicates a hazard that could lead to minor or moderate injuries. Always follow these
instructions.
Note
: Points of emphasis and reminders of operational peculiarities for the device that could affect
performance.
Always follow these instructions.
Definition of general notices
2
Safety and environment
Electrostatic Discharge Caution
: ESD (electrostatic discharge) sensitive device. Improper handling
may damage the Application Board 3.0 resulting in total or intermittent failures. Use the Application
Board 3.0 only in an ESD protected environment and follow ESD-prevention procedures. To prevent
ESD damage use an ESD wrist or ankle strap connected to an unpainted metal surface.
Radio frequency radiation exposure and further information
The radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the
device should be used in such a manner that the potential for human contact during normal operation is minimized.
Disposal
Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on
human health and the environment, which could otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.
INFO
: General information and instructions that must be followed
TIP
: Practical advices
