Bosch Rexroth VT-MRMA1-1, Руководство по эксплуатации

Страница: 7 / 52

Safety instructions 7/52
RE 30214-B/03.2019, VT-MRMA1-1, Bosch Rexroth AG
2 Safety instructions
2.1 About this chapter
The analog amplifier module has been manufactured according to good engineering
practice. There is, however, still a risk of personal injury or damage to equipment
if you do not observe this chapter and the safety instructions contained in this
documentation.
▶ Read these instructions completely and thoroughly before working with the
product.
▶ Keep this documentation in a location where it is accessible to all users at all
times.
▶ Always pass the product together with the required documentation to third
parties.
2.2 Intended use
The analog amplifier module is an electrical component.
You may use the product as follows:
• For controlling a DC motor-actuated proportional pressure reducing valve with
electrical position feedback, type (Z)DRS, size 6, component series 1X
The product is intended exclusively for professional use and not for private usage.
Operation according to the intended use also implies that you have read
and understood this documentation completely, especially chapter 2 “Safety
instructions“.
2.3 Improper use
Any use other than described in the section “Intended use” is considered as
improper and is therefore not permitted.
For damage resulting from improper use, Bosch Rexroth AG will not bear liability.
The risks arising from improper use lie exclusively with the user.
Improper use includes, but is not limited to the following, foreseeable misuse:
• operating the analog amplifier module outside the specified performance limits and
operating conditions, especially the prescribed ambient conditions;
2.4 Personnel qualifications
The activities described in this documentation require basic knowledge of electrics
and hydraulics as well as knowledge of the associated technical terms. To ensure
safe usage, these activities may therefore only be carried out by qualified personnel
or under the direction and supervision of qualified personnel.
Qualified personnel are those who can recognize possible hazards and institute
the appropriate safety measures due to their professional training, knowledge and
experience, as well as their understanding of the relevant conditions pertaining to
the work to be done. Qualified personnel have to observe relevant specialist rules
and have the required expertise.
With regard to hydraulic products, specialist knowledge means, for example:
• The ability to read and entirely understand hydraulic circuit diagrams,