Bosch Rexroth VDP 92.1, Руководство пользователя

Страница: 27 / 52

VDP 92.1 Dimensions
5-3
DOK-SUPPL*-VDP*92.1***-PR02-EN-P
5.2 Installation
Installation Notes
When installing the operator panel observe to ensure an ergonomic
operation. Additionally, ensure that all moving machine components are in
sight of the operator.
Avoid installation locations exposed to direct sunlight, as additional heat
development can occur.
Install the operator panel in a manner ensuring easy access to the front
panel (top side).
Lay all connecting cables in loops and use strain reliefs for all cables.
Keep a suitably large distance from sources of interference.
Mounting Cut-Out
To mount the operator panel proceed as follows:
1. Create a mounting cut-out with 8 holes, diameter 4.5 mm.
2. Insert the operator panel from the front into the cut-out. Then insert
the mounting bolts M4 into the drilled holes.
3. Fasten the operator panel by screwing the nuts at the rear side of the
mounting bolts.