Bosch rexroth MSK 030 Скачать руководство пользователя страница 53

Страница: 53 / 72

Maintenance and repair

8.1

Cleaning and servicing

Danger! Electric voltage! Operations in the vi‐

cinity of live parts are extremely dangerous.

WARNING

Any work required on the electric system may be carried out

only by skilled electricians. Tools for electricians (VDE tools)

are absolutely necessary.
Prior to commencing work:

1. Isolate (even auxiliary circuits).
2. Secure against reactivation.
3. Ensure de-energization.
4. Ground and short-circuit.
5. Cover or shield any adjacent live parts.

Personal and material damage during main‐

tenance work in operation!

WARNING

Never do any maintenance work on life machines.
While carrying out maintenance work, secure the machine

such that it cannot restart or be used by unauthorized per‐

sons.

Hot surfaces with temperatures over 70 °C

may cause burns!

CAUTION

Before you work in the machine, let the motor cool down.
Wear safety gloves.
Do not work on hot surfaces.

Motors

Excessive dirt, chips or dust can negatively influence the motor functions. In

extreme cases lead to motor loss. Clean the cooling fins of the motors at reg‐

ular intervals (after one year at the latest) to reach a sufficiently high heat

emission surface. If the cooling fins are partially covered with dirt, sufficient

heat dissipation via the ambient air is no longer ensured.

Connection cables

Death by electrocution possible due to live

parts!

WARNING

Change damaged connection cables and decommission

the plant immediately.

Do not repair any connection lines provisionally.

●

Check in regular distances the connection cables on damage and re‐

place them if necessary.

●

Check optionally existing drag chains (Drag chains) on defects.

●

Check the protective conductor connection for proper condition and firm

seating at regular intervals. Replace it, if necessary.

MSK Synchronous Servomotors

39/57

Maintenance and repair

R911325169_Edition 03 Bosch Rexroth AG

Содержание rexroth MSK 030









































































Результаты поиска

Содержание rexroth MSK 030

Отзывы:

Бренды по названию

Популярные бренды

Bosch rexroth MSK 030, Руководство по эксплуатации

Результаты поиска

Содержание rexroth MSK 030

Отзывы:

Бренды по названию

Популярные бренды