42 / 50
MS2S
Bosch Rexroth AG
R911410077, Edition 01
Magnets
WARNING
Danger due to permanent magnets!
−
Health hazard for persons with heart pace-
makers, metallic implants and hearing aids
in direct environment of permanent mag-
nets.
−
Crushing hazard of fingers and hand due to
heavy attractive forces of the magnets.
−
Risk of destruction of sensitive parts like
watches, credit cards, ...
Remark:
The permanent magnets of the rotor
or secondary part must be demagnetized before
disposal to avoid injuries or damage.
The demagnetization is reached via special
thermal treatment. The handling duration is influ-
enced by the rotor frame size. The rotor or the
secondary part has to remain in the oven for a
minimum of 30 minutes, starting at the time, the
magnetic surface has reached 300 °C. If the mag-
nets are surrounded by a bandage or a cover
plate, it is recommended to remove it before
heating in the oven to expose the magnets.
If demagnetization is successful, the magnets can
be separated from the rotor or secondary part
after cooling without applying force.
Packaging
Our packaging materials do not contain any prob-
lematic materials and can therefor be easily dis-
posed. Packaging materials are: wood, cardboard
and polystyrene.
Batteries and accumulators
The symbol indicating "separate collection" for all
batteries and accumulators is the crossed-out
wheeled bin. End users in the EU are legally
bound to return used batteries and accumulators.
Outside the scope of the EU Directive
2006/66/EC, the applicable regulations must be
followed. Batteries and accumulators can contain
hazardous substances which can harm the envi-
ronment or people's health when improperly
stored or disposed of. The batteries or accumula-
tors must be returned to the country-specific col-
lection systems for proper disposal.
Disposal by the manufacturer
Our products can be returned to us for disposal.
However, this requires that the products are free
from oil, grease or other dirt. The motor compo-
nents must be returned in a suitable packaging
(origin package if possible). In the case of a
transport by air freight, please observe the dan-
gerous goods regulations (IATA) for the secon-
dary part.
Send the products to the following address, car-
riage free:
Bosch Rexroth AG
Bgm.-Dr.-Nebel-Str. 2
97816 Lohr a.Main, Germany
12
Eliminate malfunction
As a matter of principle, the instructions in the project planning and commissioning manuals must be
followed in case of failures and errors. Contact the manufacturer, if necessary.
Fault description
Cause
Remedy
Motor does not run
Controller enable signal missing
Activate controller enable
signal
Controller fault
Troubleshoot acc. to docu-
mentation of controller
Voltage supply missing
Control voltage supply
